BRASS COMPRESSION FITTINGS

⬅ Products     ⬅ Fittings & Tubing     ⬅ Compression Fittings

Male Stud Couplings
Male Stud Coupling BSPT or NPT Thread

In-line connection of tubing with male thread.
Available from 4 to 28 mm o.d.

Material:
Brass
Maximum working pressure: 550 bar/ 55 MPa/ 7977 psi
Working temperature: -60 to 250 °C/ -76 to 482 °F/ 213 to 523 °K
Vacuum capability: 755 mm Hg
Fitting:
BSPT


For further information please refer to our catalogue
Male Stud Coupling BSP Parallel and Metric

In-line connection of a tubing with male thread.
Available from 4 to 28 mm o.d., BSPT metric thread.


Material: Brass
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer:
Technical Polymer
Fitting:
BSPT Metric Thread
For further information please refer to our catalogue
Male Stud Coupling BSP Parallel Thread

In-line connection of a tubing with male thread, with bi-material seal.
To ensure perfect sealing and excellent resistance to compression.
Available from 4 to 28 mm o.d., BSPT metric thread.

Material: Brass
working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
'O'-rings: 
Zinc Plated Steel with NBR Seal
For further information please refer to our catalogue
Stud Coupling Male Metric Thread

In-line connection of a tubing with male thread.
Available from 4 to 18 mm o.d., metric thread.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K

For further information please refer to our catalogue
Male Stud Elbow BSPT Thread

Tube to male thread 90 degree elbow connection. Available from 4 to 28 mm o.d.

Material: Brass
Maximum working temperature:-40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Male Stud Elbow NPT Thread

Tube to male thread 90 degree elbow connection. Available from 4 to 28 mm o.d.

Material: Brass
Maximum working temperature:-40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Male Stud Orientable Elbow, BSP Parallel Thread

Orientable 90 degree elbow connection of tubing and a male thread. Available in 4 to mm o.d., BSPT or NPT thread.

Material: Brass
Maximum working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
'O'-rings: NBR
For further information please refer to our catalogue
Male Stud Branch Tee BSP Taper Thread

Connection of 2 tubes at a 180° angle with male thread. Available from 4 to 22 mm o.d. in BSPT or NPT thread

Material: Brass
Maximum working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Male Stud Run Tee BSP Taper Thread

Connection of 2 tubes at a 90° angle with male thread. Available from 4 to 22 mm o.d., BSPT thread.

Material: Brass
Maximum working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Female Stud Couplings
Female Stud Coupling BSP Parallel Thread

In-line connection of tubing with female thread.
Available from 4 to 25 mm o.d., BSPP thread.


Material: Brass
Maximum working pressure: 550 bar / 55 MPa / 7977 psi
Working temperature:
-60 to 250 °C / -76 to 482 °F / 213 to 523 °K
Vacuum capability:
755 mm Hg
For further information please refer to our catalogue
Banjo Fittings
Single Banjo BSP Parallel Thread

Single banjo elbow connection between tube and male thread. Available form 4 to 22 mm o.d., BSPT or NPT thread.

Material: Brass
Maximum working pressure: 20 bar / 2 MPa / 290 psi
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer: Technical Polymer
For further information please refer to our catalogue
Single Banjo BSP Parallel Thread

Single banjo elbow connection between tube and male thread, with bi-material seal. To ensure perfect sealing and excellent resistance to compression. Available form 4 to 22 mm o.d., BSPT or NPT thread.

Material: Brass
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer: Zinc Plated Steel with NBR Seal
For further information please refer to our catalogue
Double Banjo BSP Parallel Thread

Double banjo connection between tube and male thread. Top knob adjustment made with a flat spanner, optimized for difficult access problems.

Material: Brass
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer: Technical Polymer
For further information please refer to our catalogue
Double Banjo NPT Thread

Double banjo connection between tube and male thread, with bi-material
seal. To ensure perfect sealing and excellent resistance to compression.
Top knob adjustment made with a flat spanner, optimized for difficult
access problems.

Material: Brass
Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing washer: Zinc Plated Steel with NBR Seal
For further information please refer to our catalogue
Equal Ended Couplers
Equal Ended Straight Coupling

Connection of 2 tubes together at a 180° angle. Available from 4 to 28 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Bulkhead Coupling

Connection of 2 tubes together at a 180° angle through a panel. Available from 4 to 25 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Equal Elbow

Connection of 2 tubes together at a 90° angle. Available from 4 to 28 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Equal Tee

Connection of 3 tubes at two 90° angles. Available from 4 to 16 mm o.d.

Material: Brass
Maximum Working Pressure: 550 bar / 55 MPa / 7977 psi
Vacuum capability: 755 mm Hg
Working temperature: -60 to 250 °C / -76 to 482 °F / 213 to 523 °K

For further information please refer to our catalogue
Equal Y Piece

Connection of 3 tubes at two 90° angles. Available from 4 to 16 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Equal Cross

Connection of 4 tubes at 90° angles. Available from 4 to 25 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Reduction Assembly
Reduction Assembly

Enables small-sized tubing to be used with a standard Legris coupling designed for larger sized tubes. Available from 4 to 22 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Olives
Brass Olives

For use with the body and nut in order to form a complete Legris compression fitting.
Recommended for connection to thermoplastic, brass or hardened copper. Ensures optimum sealing of installation.

Material: Brass
Working temperature: -60 to 250 °C / -76 to 482 °F / 213 to 523 °K
Maximum Working Pressure: 550 bar / 55 MPa / 7977 psi
Vacuum capability: 755 mm Hg
For further information please refer to our catalogue
Passivated Steel Olives

Used with the body and nut in order to form a complete Legris compression fitting.
Ensures optimum sealing of assembly. For use with steel tubing.

Material: Zinc Plated Steel
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
BNA Brass Olives

Used with a body and nut in order to form a complete Legris compression fitting.
Can be assembled on annealed copper tubing. Ensures optimum sealing of installation.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Nuts
Brass Nuts Metric

Used with a body and sleeve to form a complete Legris compression fitting. Ensures optimum sealing of installation.

Material: Brass
Maximum Working Pressure: 550 bar / 55 MPa / 7977 psi
Working temperature:-60 to 250 °C / -76 to 482 °F / 213 to 523 °K
Vacuum capability: 755 mm Hg
For further information please refer to our catalogue
Passivated Steel Nut Metric

For use with the body and sleeve in order to form a complete Legris compression fitting. Ensures optimum sealing of assembly. For use with steel tubing.

Material: Zinc Plated Steel
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Brass Nuts

For use with the body and sleeve in order to form a complete Legris compression fitting. Suitable for annealed copper tubing and for all aplications with strong vibrations. Ensures perfect sealing of tube.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Olive Nut Engineering Plastic Metric

Acts as both the nut and sleeve when used with soft thermoplastic tubing

Material: Technical Polymer
Working temperature: -20 to 80 °C / -4 to 176 °F / 253 to 353 °K

For further information please refer to our catalogue
Male Sleeve Nut for Standard Olive

Male nut for standard sleeve. Available from 4 to 14 mm o.d.

Material: Brass
Maximum Working Pressure: 550 bar / 55 MPa / 7977 psi
Vacuum capability:
755 mm Hg
Working temperature: -60 to 250 °C / -76 to 482 °F / 213 to 523 °K
For further information please refer to our catalogue
Tailpiece Adaptors
Tailpiece Adaptor for Rubber Hose

Quick connection of a hose to a compression fitting. Available from 4 to 28 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Tailpiece Adaptor for Plastic Hose

Quick connection of tubing to a compression fitting.Available from 4 to 16 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Plugs
Plug

Used to cap off tubing in a compression fitting. Replaces the sleeve. Available from 4 to 28 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Metric Parallel Tube End Plug

Used to cap off unused tubing, comprising a sleeve and a nut in a compression fitting.
Available from 4 to 14 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Straight Stem Adaptor
Straight Stem Adaptor BSP Taper Thread

Male thread straight stem adaptor. Available from 4 to 28 mm o.d.

Material: Brass
Working temperature: -40 to 250 °C / -40 to 482 °F / 233 to 523 °K
For further information please refer to our catalogue
Straight Stem Adaptor BSP Parallel Thread

Male thread straight stem adaptor with bi-material seal. Available from 4 to 28 mm o.d.

Working temperature: -40 to 100 °C / -40 to 212 °F / 233 to 373 °K
Sealing Washer: Zinc Plated Steel with NBR Seal
Material:
Brass
For further information please refer to our catalogue