VACUUM - PUMPS

⬅ Products     ⬅ Vacuum

Single Stage Pumps
ER Pumps

Part Number:  ER2010, Vacuum Bar, T18F, T12F, SM Micro Pump, Inline Pump, DER18-PS, DER18-PSB, DER18-S24D, DER18-SB24D


For further information refer to Online Specs

EV Pumps

Part Number:  EV05HS, EV10HS, EV15HS, EV20HS

EV single stage vacuum generators provide a compact,
lightweight, low-cost vacuum source for pick-and-place
and material handling applications.
The simple two-piece design allows ingested debris to
exit the exhaust port. The optional ST, straight-through,
exhaust silencer is a no-clog design that will pass
ingested debris to atmosphere.

For further information refer to Online Specs

J Pumps

Part Number:  Basic, PS, PSB, S24D, SB24D


For further information refer to Online Specs

Rail Systems


The 1-1/2" X 3" aluminum extrusion profiles include 3/8" NPSF ports at
each end. One port is for air supply and the other for a plug or a
pressure gauge. Rails are drilled to mount modules on center-to-center
distances to your specifications. The minimum recommended spacing is
1-1/2" (38.1 mm) but is also dependent on vacuum cup diameter. Pilot port
fittings, zone tubing and 3-way air solenoid pilot valves must be
installed by the system integrator because of the many possible
configurations.

Single side and double side assembly options available. Vacuum sensor option available.

For further information refer to Online Specs

SM Pumps

Part Number:  SM24-38

  • Compact Size
  • Light Weight: 0.35 lbs.
  • Economical
  • Maintenance Free
  • Energy Efficient
  • Quiet Operation
  • High Flowrate
  • Brass Nozzle
  • Anodized Aluminum Body
  • Through Holes for Mounting
  • 100 psi Max Air Supply
  • Stainless Fasteners
  • All Metal Construction
  • Multi-characteristic pump with three operating pressures

Mini System also available

For further information refer to Online Specs

V Pumps

Part Number:  Basic - V10-60, V10-90, V10-100, V10-150, V20-60,
                                        V20-90, V20-100, V20-150, V80-200, V80-250,
                                        V90-300, V90-350
                            Automatic Blow-off - V10X, V20X, V80X



For further information refer to Online Specs

Vacuum Grippers

Part Number:  VG18, VG38, VGP38

VG Models - Options available include:
Purge option, Sensor Port option,
M4 Plate Mount feature, Swivel Mount feature,
T-Nut Kits and Cup Fitting adaptors.

VGP Models - Options available include a variety of mount options and PP or LP purge options.


For further information refer to Online Specs

Dual Venturi Vacuum Grippers

Exhaust adaptor, PP or LP Purge options, and either standard M4 plate or swivel mount options available.


For further information refer to Online Specs

Variable Displacement Pumps

VDS vacuum pumps can provide over 20" Hg (68 kPa) and their straight
through, non-clog design is ideal for very dusty and dirty applications
such as bag filling or handling ceramics or masonry products. The
square body and two mounting holes makes the VDS pump easy to attach to
any flat surface. A straight through silencer will not accumulate debris
and will pass it out with the exhaust air.



For further information refer to Online Specs