QUICK ACTING COUPLERS AND BLOWGUNS

⬅ Products     ⬅ Fittings & Tubing

Couplers
Male Threaded Probe BSP Parallel

Assembled with a body, forms a quick acting coupler adapted to applications using water and compressed air.

Maximum Working Pressure: 20 bar / 2 MPa / 290 psi
Working Temperature:
-20 to 100 °C / -4 to 212 °F / 253 to 373 °K
Body:
Nickel Plated Brass
For further information please refer to our catalogue
Female Body BSP Parallel

Assembled with a probe, forms a quick acting coupler offering the user an interesting solution adapted to all compressed air installations and with a good flow and dimension ratio. Incorporates a shut-off valve which stops fluid flow when the probe is removed.

Maximum Working Pressure: 20 bar / 2 MPa / 290 psi
Working Temperature:
-20 to 100 °C / -4 to 212 °F / 253 to 373 °K

Shut-Off Valve: Brass
Body:
Nickel Plated Brass
'O'Rings: NBR
Spring: Stainless Steel

For further information please refer to our catalogue
Blowguns and Accessories
Coilhose Safety Rubber Tip

Non marring material resulting in a tip which meets or exceeds OSHA standards but is still safe to use around delicate or finished surfaces. Fine for wood working, molds and automotive or industrial finishing.

Fits four blow gun styles: 600 series, 700 series, 771 series and Inline series blow guns.
For further information please refer to our catalogue
Coilhose Air Bullet Blow Gun

Innovative "push to activate" design that allows for cleaning of tubing and holes. Unique Push to Activate Design

Material: Brass construction with rubber conical tip
Inlet: 1/4" npt
Maximum Inlet Pressure: 150 psi

For further information please refer to our catalogue
Coilhose Cannon Blow Gun

The Coilhose Cannon® provides the user with up to 135 cfm of air flow. The Cannon® is a safer alternative to the field expedient ball valve and pipe often seen on job sites. The Cannon® features an assisted trigger that activates with little pull weight, and will shut off in the event the gun is dropped. The Single Nozzle Cannon® provides a more concentrated airstream that will remove debris from cracks and corners.
Note: Uses compressed air from tow-behind compressors. Compressor must replenish its tanks @ 40 CFM or greater.

Air Consumption:  135 CFM at 100 PSI
​Materials: Die Cast Aluminium, Machined Brass, Aluminium and Stainless Steel
Inlet:​ 3/4" Female

For further information please refer to our catalogue
Coilhose Cannon Multi-Jet Blow Gun

The Coilhose Cannon® provides the user with up to 135 cfm of air flow. The Cannon® is a safer alternative to the field expedient ball valve and pipe often seen on job sites. The Cannon® features an assisted trigger that activates with little pull weight, and will shut off in the event the gun is dropped. The Multi-Jet Nozzle Cannon® provides a broader “wall” of air that will clear away debris on floors, roads, and walkways.
Note: Uses compressed air from tow-behind compressors. Compressor must replenish its tanks @ 40 CFM or greater.

Air Consumption:  135 CFM at 100 PSI
Materials: Die Cast Aluminium, Machined Brass, Aluminium and Stainless Steel
Inlet:​ 3/4" NPT

For further information please refer to our catalogue